Proacademy Furniture

Proacademy Furniture

My Cart 0 items: $0.00

Learn2 Strive L2SNP/CA/CAR Cantilever Arm Chair with Accessory Rack/Cup Holde

Be the first to review this product

Availability: In stock

Regular Price: $580.00

Special Price: $377.00

Quick Overview

Overall Width: 24.25"
Overall Depth: 23.25"
Overall Height: 34.5"
Seat Width: 18"
Seat Depth: 18"
Seat Height: 18.5"
Weight: 56lbs

 Learn2 Strive  L2SNP/CA/CAR  Cantilever Arm Chair  with Accessory Rack/Cup Holde

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Name Learn2 Strive L2SNP/CA/CAR Cantilever Arm Chair with Accessory Rack/Cup Holde
Manufacturer KI
Frame Frame shall consist of 14-gauge 1" O.D. steel tubing bent and welded to a 13-gauge steel stamped seat plate and finished with baked on powdercoated paint. The chair frame shall be topped by two aluminum die castings with a baked on black powdercoated paint finish. Castings support the chair seat and provide a means of rotation of the tablet about the seat. Shell Strive® Injection molded polypropylene back with integral steel cantilever springs. The combination of the slotted polypropylene back and the spring steel provides a supportive flexing back. Springs are nominal 4.5mm diameter chrome silicon valve spring wire. Injection molded polypropylene seat shall be secured to the chair by a 12-gauge formed steel plate. Optional upholstered seat - molded urethane foam is attached to an injection molded polypropylene seat board, then upholstered using a draw-string process. The assembled seat pad is attached to the seat by means of hidden fasteners. Optional arms - when equipped with optional cantilever arms, the supporting structure is 7 / 8" O.D. x 13-gauge tubular steel, welded directly to the seat support structure, and matching the seat and back color. The armcaps are injection-molded glass filled polypropylene matching the seat and back color. The armcaps are attached to the steel structure by means of screws. The Strive shell is designed by Giancarlo Piretti. The chair shell (either option) swivels a total of 55° (27.5° each way from center) for ease of entry and exit. Surface Support The worksurface shall be supported from the chair frame by a formed and welded support tube made from 1.125" O.D. 14-gauge steel. The worksurface shall be supported from the support tube by an aluminum gusset die casting with a black powdercoated paint finish. The support tube rotates around the chair seat a total of 220° (110° each way from front-center). A 1 / 2" thick steel plug shall be drilled, tapped, and welded into the end of the support tube. The worksurface shall be structurally secured to the support tube with Grade 5, 3 / 8 -16 bolt, held in place with an epoxy patch. Surface Mechanism The gusset die casting shall rotate about the support tube by means of a plastic bushing connection, rotating a total of 154° around the support tube (77°each way from center). The worksurface shall slide back and forth for a total of 6" of straight in and out movement. The sliding motion shall be accomplished with an aluminum extruded rail and plastic bushing mechanism. December 2014 TECHNICAL SPECIFICATIONS (CONTINUED) Surface The worksurface shall measure 13" x 21.5" for a writing surface area of 280 square inches. Plastic The writing surface of the plastic worksurface shall be injection molded ABS and shall include two pencil grooves and a thumb guide. The understructure of the plastic worksurface shall be injection molded nylon with fiberglass reinforcement filling. Top surface available in Black, Flannel, or Warm Grey; bottom understructure is black only. Laminate The laminate worksurface shall be 18mm thick Baltic Birch plywood core with .040" laminate face and .020" paper backing sheet. The edge of the wood surface is shaped and sanded with a sealed and clear coat lacquered finish. KI standard laminates available; see Color Addendum. Optional Accessory Racks Standard and Cupholder Accessory Racks - Racks shall be constructed of 14-gauge perforated steel wrapped with .25" O.D. steel wire and welded to the frame. Optional cup holders shall be made of a .25" O.D. steel wire welded with an 11-gauge flat metal round trim plate to the steel racks. Accessory racks (with or without cupholder) are not field installable or retrofittable. Flat Accessory Rack - Rack shall be constructed of 16-gauge perforated steel wrapped with .25” O.D. steel wire welded to the frame. The rack is reinforced with stiffener channels that are constructed of 14-gauge CRS that are welded to the perforated steel rack assembly. The rack is fastened to weldments on the chair frame using #10-24 x ½” PEM studs #10-24 hex nuts and lock washers. The flat accessory rack is not field installable or retrofitable. Casters Casters shall be double wheels (60mm) of high-impact thermoplastic with high impact plastic frame. Carpet or hard floor casters, black only. Optional Bell glides (2" high) made of high-impact plastic also available, black only.